3D print Nuevo Mirandilla
A free, printable model of Nuevo Mirandilla and the surrounding city blocks of Cádiz, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Nuevo Mirandilla in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Cantilevered main roof
The main stand carries a single long roof on a deep end-supported girder. Full detail keeps its thin edge and the slender antenna masts above; Print friendly simplifies the finest members.
- Open bowl and glazed corners
Four stands with glazed corner towers surround the pitch, and repeated vomitories cut through the tiers. A larger print or 0.12 to 0.16 mm layers helps the stair aisles and glazed corners read.
- One piece with the ground
Nuevo Mirandilla is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Nuevo Mirandilla takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Nuevo Mirandilla
The home ground of Cádiz CF, Nuevo Mirandilla is a football stadium in the Spanish city of Cádiz. It opened on September 3, 1955 as Estadio Ramón de Carranza, with an inaugural match against FC Barcelona that Cádiz lost 0–4. An earlier ground on the site, the Campo de Deportes de Mirandilla, was destroyed in a 1947 explosion in Cádiz. The new Mirandilla stadium built shortly afterward was oval, held 15,000 spectators and had a 400-meter running track separating the pitch from the stands.
The stadium has been completely rebuilt twice. The first rebuilding came in 1984, when the main stand came down and was rebuilt, the other stands were redesigned, the track was taken out and the pitch moved nearer the seats. The second rebuilding ran from 2003 to 2012, when all four stands were replaced; the main Tribuna stand has 8,281 seats and is the largest. The rebuilt stadium has a total built area of 94,938 square meters and cost €68 million.
The ground took the name Nuevo Mirandilla on June 24, 2021, under Spain's Historical Memory Law. The old name referred to Ramón de Carranza, a former mayor of the city. Mirandilla was the old name of the neighborhood where the earlier sports complex stood, and the new name translates as "new little watchtower."
About this model
Nuevo Mirandilla is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
