A white 3D print of Rocket Arena, an oval drum in front of a curved metal roof that swells to a high crown, with a glass box along one side, among the streets and buildings around it.

3D print Rocket Arena

A free, printable model of Rocket Arena, an oval drum with a curved metal roof swelling above it, amid the surrounding streets and buildings, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Rocket Arena model, North view North
  • Rocket Arena model, East view East
  • Rocket Arena model, South view South
  • Rocket Arena model, West view West
On a 160 mm print
12 mm
Scale
1:3,750

12 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Thin lip over the drum

    The metal roof begins as a thin crescent lip that stands clear of the drum below it before it swells upward. Full detail keeps that gap and the seams; Print friendly adapts the lip to a small print.

  2. The glass box on one side

    A glazed box wraps the corner of the building between the drum and the street, with mullions and raking diagonals. Layers of 0.12 to 0.16 mm hold those lines, best on a bigger print.

  3. One piece with the ground

    Rocket Arena is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Rocket Arena takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Rocket Arena

Cleveland's multi-purpose arena serves two teams: the Cavaliers of the NBA and the Monsters of the American Hockey League. It holds 19,432 for basketball and 18,926 for hockey. It opened in October 1994 within the Gateway Sports and Entertainment Complex, next to Progressive Field, which had opened in April of the same year.

Naming has changed several times. Until August 2005 the building was Gund Arena, after the former Cavaliers owner Gordon Gund, who bought the rights; Dan Gilbert, majority owner from March 2005, bought them that August and made it Quicken Loans Arena. A renovation and expansion, finished in September 2019 at a cost of about $185 million, came with the shift to Rocket Mortgage FieldHouse in April 2019, and the name became Rocket Arena in 2025. Billy Joel gave the opening concert on October 17, 1994.

There are three seating levels, with 2,000 club places and 88 luxury suites. The main scoreboard, known as Humongotron, ranks fourth largest among those used in NBA arenas, and a large LED message board on the roof runs 110 m (360 ft) by 27 m (90 ft). The Mid-American Conference has held both of its basketball tournaments there since 2000 and 2001, and the building held the women's Final Four of NCAA Division I twice, in 2007 and 2024, as well as the 2016 Republican National Convention.

About this model

Rocket Arena is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Keep exploring

More landmarks to print

All 3 Cleveland landmark modelsAll landmarks