3D print Stadio Paolo Mazza
A free, printable model of the stadium's long covered grandstand, with its truss-supported roof and tiers of seats, and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Stadio Paolo Mazza in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Truss roof over the stand
A long roof on thin trusses covers the whole grandstand and overhangs the seats. Print friendly adapts these thin parts to the print scale; Full detail keeps them on a larger print.
- Seat tiers and layer height
The stepped seating rows beneath the roof are fine detail. A layer height of 0.12–0.16 mm and a bigger print size keep them readable.
- One piece with the ground
Stadio Paolo Mazza is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Stadio Paolo Mazza takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Stadio Paolo Mazza
Stadio Paolo Mazza, once named Stadio Comunale, serves several uses in Ferrara, Italy, but mostly football. SPAL plays its home games there. It lies in the Rione Giardino district, to the west of Ferrara itself and inside the city walls, close to where SPAL's old ground, the Campo di Piazza d'Armi, had stood since 1919. Ferrara's municipal stadium ranks fifth among the oldest Italian grounds still in use.
Its opening came in September 1928, under the name Stadio Comunale, with an initial capacity of 4,000. In February 1982 it took its present name, honoring Paolo Mazza, a former president of the club who had died two months before. SPAL's arrival in Serie A led to a heavy restructuring in 1951, which raised the capacity to 25,000. Renovations between the 1960s and 1980s settled it at 22,000 until the mid-2000s. From 2005 to 2016 it was limited to 7,500 for safety reasons and cost containment. After restructuring in 2016–17, a summer 2018 remodel lifted the seat count to 16,134, up from 13,135.
About this model
Stadio Paolo Mazza is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
