3D print Wiener Stadthalle
A free, printable 3D model of the Wiener Stadthalle and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Wiener Stadthalle in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A wide main hall
The main hall is much wider than it is tall, so a larger print size keeps more of its detail. A fine layer height of 0.12–0.16 mm keeps its edges crisp.
- One piece with the ground
Wiener Stadthalle is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Wiener Stadthalle takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Wiener Stadthalle
The Wiener Stadthalle ("Viennese City Hall"), in Vienna's 15th district, in Austria, serves as an indoor arena and convention center with many uses. Roland Rainer, an Austrian architect, designed the original halls, built from 1953 to 1958 and enlarged in 1974, 1994 and 2006. The complex consists of six interconnecting halls, which can be used on their own or together.
Hall D, the main hall, was completed in 1958 and is the largest indoor arena in Austria. It measures 98 by 110 meters (322 ft × 361 ft) with a ridge height of 26.6 meters (87 ft). It has up to 10,741 seats, and a combination of standing and reduced seating can lift the capacity to 16,083. The other halls are two gymnasiums, an indoor ice rink, a small multi-purpose hall and an arena hall for more intimate concerts, plus the Stadthallenbad swimming pool.
The Erste Bank Open tennis tournament has been held here every year since 1974. The Ice Hockey World Championships came here in 1967, 1977, 1987 and 1996, and again in 2005, and the arena also hosted the European Men's Handball Championship in 2010 and 2020. In 2015 it staged the 60th Eurovision Song Contest in the main hall, won by Måns Zelmerlöw for Sweden.
About this model
Wiener Stadthalle is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
