3D print the William Hall Walker Gymnasium
A free, printable model of the round-roofed gymnasium and the campus buildings, paths and green space around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A ribbed round roof
The big round roof has a ring of fine ribs around a central opening. Full detail keeps those ribs, and a layer height of 0.12-0.16 mm helps them stay crisp.
- One piece with the ground
The William Hall Walker Gymnasium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The William Hall Walker Gymnasium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the William Hall Walker Gymnasium
The William Hall Walker Gymnasium, an athletic building, belongs to the Stevens Institute of Technology campus in Hoboken, in Hudson County, New Jersey. Its address is Fieldhouse Road, near Sixth Street, in the part of Hoboken called Castle Point. Construction ran from 1915 to 1916.
The National Register of Historic Places added it on May 9, 2019, citing its significance in architecture. Its architect is listed as Ludlow and Peabody, its owner as Stevens Institute of Technology, and it is classed as a multi-purpose hall. A piece about the gymnasium appeared in The American Architect on April 18, 1917.
About this model
The William Hall Walker Gymnasium is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
