3D print 170–176 John Street
A free, printable model of 170-176 John Street and the tall buildings and small park with a pond beside it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 6 mm
- Scale
- 1:3,750
6 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine cornice and window rows
The building has a detailed cornice and many rows of small windows. A larger print size and Full detail keep them separate; a layer height of 0.12-0.16 mm keeps the lines crisp.
- One piece with the ground
170–176 John Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 170–176 John Street takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 170–176 John Street
Along the East River, on John Street in Lower Manhattan's Financial District, stands 170-176 John Street, a commercial building erected in 1840. It faces Burling Slip, which has since been filled in. It is among the few granite-faced Greek Revival buildings still standing in New York City, possibly one of just two.
Its first name was the Hickson W. Field building. It was later used as a ship chandlery and then became the Baker, Carver & Morrell Building. The National Register of Historic Places listing came in 1971. Developer Daniel W. Gerrity turned the building into housing in 1982 and added a sixth story, with Buttrick White & Burtis as architects of the project.
About this model
170–176 John Street is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
