3D print 2 Herald Square
A free, printable model of 2 Herald Square, with its notched roof plan, and the taller buildings and streets around it in Manhattan, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Notched E-shaped roof plan
The roof plan has narrow notches between its wings, which can close up at small print sizes. A larger print keeps them open, and Full detail keeps every modeled feature.
- Ornate facade bands
Decorative bands and cornices run across the facade. A layer height of 0.12–0.16 mm keeps these fine horizontal lines crisp.
- One piece with the ground
2 Herald Square is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 2 Herald Square takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 2 Herald Square
2 Herald Square began life as the Marbridge Building, an office block at 1328 Broadway. Its east-side Sixth Avenue site lies between 34th and 35th Streets, within Manhattan's Herald Square. The 11-story structure opened in 1909, and the men's clothier Rogers Peet used part of it. Across Broadway stood the Macy's Herald Square store, as well as Saks Incorporated, and Gimbels sat just below them.
Until October 1910 the building faced the Alpine apartment house, at Broadway and 33rd Street, on the corner's northeast side. Near the end of 1910 the Alpine and some old stores nearby were torn down to build the $5,000,000 Hotel McAlpin. In its early days, John McGraw, who was then managing baseball's New York Giants, ran a billiards parlor in the new building in partnership with Mike Donlin, an outfielder on the Giants. Willy Hoppe took the business over in January 1912.
In 2002 the marketing firm Publicis relocated its U.S. offices into the building, leasing 114,000 square feet across four E-shaped floors. Morris Adjmi Architects designed an elliptical staircase connecting the 8th through 11th floors. Townsend, Steinle & Haskell are listed as the building's architects.
About this model
2 Herald Square is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
