3D print 210 East 68th Street
A free, printable model of 210 East 68th Street, a stepped apartment building with banded facades, shown among taller buildings and generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 15 mm
- Scale
- 1:3,750
15 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Banded facade and setbacks
Horizontal bands run across the facade, and the upper floors step back. Print friendly adapts these fine lines to the print scale; Full detail keeps them on a larger print with a layer height of 0.12-0.16 mm.
- Small rooftop details
Small boxes sit on the stepped roofs. A bigger print size keeps them from blurring.
- One piece with the ground
210 East 68th Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 210 East 68th Street takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 210 East 68th Street
The apartment building at 210 East 68th Street stands in Manhattan's Upper East Side, where 68th Street meets Third Avenue, on the southeast corner. George and Edward Blum designed it in the Art Deco style, and it was constructed in 1928-1929. It is among the first Art Deco apartment buildings in the city. The site slopes down toward the east, so the building has 16 stories at its east end and 15 at the Third Avenue end.
The facade is clad in orange or buff brick. Terracotta bands in orange, black and shades of green set it apart from contemporary structures; unlike at other Art Deco buildings, those colors overlap and interweave. Spaced every two stories, bands of brick and terracotta form wandering patterns across several stories, with an upward jog of one story at the outermost bays. The roofline has no cornice. Historians note that the Blums' buildings typically carry distinctive decoration, and the multicolored terracotta here is an example.
Inside, a vestibule leads to a lobby that spans several terraced levels linked by short flights of steps. The building holds about 200 apartments, and as built each had one to six rooms. Sophia Buttenweiser Mayer built it as a speculative development, with the Blums as designers. It has a National Register of Historic Places listing.
About this model
210 East 68th Street is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
