3D print 461 Fifth Avenue
A free, printable model of 461 Fifth Avenue and the tall Midtown buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About 461 Fifth Avenue
Standing on the northeast corner where Fifth Avenue crosses 40th Street in Midtown Manhattan, 461 Fifth Avenue is a skyscraper with 28 stories. The Mitsui Fudosan development group built it in 1988 to a design by Skidmore, Owings & Merrill, credited to Raul de Armas of that firm.
The building pairs a 10-story base that echoes older 19th-century buildings nearby with a post-modern tower of 18 stories. Its walls are finished in pre-cast concrete made to resemble limestone, and the roof is a copper mansard similar to others in the area. A setback at the base lines up with the height of older neighbors.
Earlier, the address was a private residence, and between 1911 and 1915 an eleven-story office building replaced the house. That building became a Lane Bryant store in 1945 and was demolished by 1988. Within a year of completion, the new tower was 90% occupied, and it helped set off a boom in construction around Fifth Avenue.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 31 mm | 1:3,750 |
| 200 mm | 38 mm | 1:3,000 |
| 256 mm | 49 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Narrow tower, small crown
- The renders show a slim tower with a small roof crown. Print slowly with good cooling for the upper floors, and use Full detail on a larger print to keep the roof shape.
- One piece with the ground
- 461 Fifth Avenue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 461 Fifth Avenue takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
461 Fifth Avenue is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a 461 Fifth Avenue STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. 461 Fifth Avenue grows with the print: about 31 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
