3D print 130 West 57th Street
A free, printable model of 130 West 57th Street, a tall narrow building with rows of tall windows, and the much taller buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
130 West 57th Street in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 46 m
- On a 160 mm print
- 13 mm
- Scale
- 1:3,750
46 m of 130 West 57th Street, 13 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall narrow shape
The building is slim and tall, with rows of narrow windows and a projecting cornice near the top. Print slowly, and use Full detail on a larger print to keep the window rows and cornice crisp.
- One piece with the ground
130 West 57th Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 130 West 57th Street takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 130 West 57th Street
The office building at 130 West 57th Street sits in Midtown Manhattan, two blocks south of Central Park; its block of 57th Street runs between Sixth and Seventh Avenues. Pollard and Steinam designed it, and it was built in 1907–1908. The same architects designed 140 West 57th Street, a neighboring and nearly identical building, at the same time. Both belong to a group of early 20th-century Manhattan buildings made as studios and residences for artists.
The facade is limestone on the lowest two stories and brick above. Metal-framed studio windows fill broad and narrow bays, and some are double-height. The building is 150 feet (46 m) tall, with 14 stories in the front portion along 57th Street and 12 in the rear. It was designed with 36 studios, and its position on the south side of the street meant the interiors would be bright with sunlight from the north.
Artist Robert Vonnoh owned the land. Though marketed as artists' studios, the building also housed lawyers, stock brokers and teachers, among other professionals. It became a rental-apartment building in 1937 and an office building later in the 20th century. New York City's Landmarks Preservation Commission designated it a city landmark in 1999.
About this model
130 West 57th Street is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Outside the United States this design may still be protected; check the rules where you sell.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





