3D print 49 East 80th Street
A free, printable model of 49 East 80th Street and the buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine facade details
The facade carries small window and trim details. Print friendly adapts them to the print scale; Full detail with a larger print and 0.12–0.16 mm layers keeps more of them crisp.
- One piece with the ground
49 East 80th Street is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 49 East 80th Street takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 49 East 80th Street
49 East 80th Street is a house in Manhattan's Upper East Side. Harry Allan Jacobs designed it in the Art Deco style for the banker Lionello Perera, and it was built in 1930. Multi-colored stone and brick form the front of the house, while the rear is brick only.
The house has five stories plus a basement, with eight bedrooms and five bathrooms spread over roughly 9,200 square feet (850 m2). After Perera died in 1942, the banker Walter E. Sachs used the house. Sachs sold it in 1970 to the singer Barbra Streisand. It is included in the National Register of Historic Places.
About this model
49 East 80th Street is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
