3D print 737 Park Avenue
A free, printable model of 737 Park Avenue and the buildings and streets around it on the Upper East Side, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 18 mm
- Scale
- 1:3,750
18 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Setbacks and rooftop details
The upper floors step back and carry small roof structures. Layers of 0.12–0.16 mm keep these crisp; a larger print or Full detail keeps more of them.
- One piece with the ground
737 Park Avenue is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 737 Park Avenue takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 737 Park Avenue
A prewar apartment house on Manhattan’s Upper East Side, 737 Park Avenue stands on the corner of 71st Street. Sam Minskoff and Sons built it in 1940 to a design by the Art Deco architect Sylvan Bien. Its walls are traditional red brick over a limestone base, and it has a marble lobby and a 24-hour doorman.
The building first held more than 100 apartments; after renovation it has 60. The Whitney Museum, The Frick Collection and Central Park are all nearby, as is The Carlyle Hotel, which Bien also designed. In 2011 the building was sold to the real estate developer Harry Macklowe.
About this model
737 Park Avenue is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
