3D print the A. I. Namm & Son Department Store
A free, printable 3D model of the Namm department store, formally A. I. Namm & Son, with its curved corner, and the taller buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 10 mm
- Scale
- 1:3,750
10 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Curved corner and roofline
The rounded corner and the small ornaments along the roofline are the fine parts. Full detail keeps them on larger prints, Print friendly simplifies them at small scale, and thin layers keep the pilaster lines sharp.
- One piece with the ground
The A. I. Namm & Son Department Store is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The A. I. Namm & Son Department Store takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the A. I. Namm & Son Department Store
A. I. Namm & Son Department Store stands at 450–458 Fulton Street, on the southeast corner where Hoyt Street meets it, in Downtown Brooklyn. Nothing else survives of the building complex put up for the Namm store chain. The current structure rose in 1924–1925 and was enlarged in 1928–1929. Architects Robert D. Kohn and Charles Butler gave it an Art Deco design, and it stands eight stories tall. New York City has designated it a landmark.
Adolph I. Namm, a Polish immigrant, founded the store in 1876 in Manhattan's Ladies Mile district. In 1885 he relocated to Brooklyn, and in 1890 the store reached Fulton and Hoyt streets. By the 1920s it ranked among the largest cash-only department stores in the United States. A 1950s merger with Frederick Loeser & Co. led to the closing of the Brooklyn store. Demolition took most of the site in 1957, and what remained served as an Abraham & Straus store through 1980.
The facade has four horizontal sections, with details such as pilasters, balconies and pediments. When completed, the lowest two stories wore bronze and stone cladding, and the upper stories limestone. The building has a curved corner where Fulton and Hoyt streets meet. A large entrance opened onto Fulton Street when the building was new.
About this model
The A. I. Namm & Son Department Store is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
