A white 3D print of the Abbey Church of Sainte-Foy, with a rounded apse and pyramid-roofed towers, surrounded by closely packed buildings and a green hillside.

3D print the Abbey Church of Sainte-Foy

A free, printable model of the Abbey Church of Sainte-Foy, with its rounded apse and pyramid-roofed towers, set among closely packed buildings and hillside, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Abbey Church of Sainte-Foy model, North view North
  • Abbey Church of Sainte-Foy model, East view East
  • Abbey Church of Sainte-Foy model, South view South
  • Abbey Church of Sainte-Foy model, West view West

© OpenStreetMap contributors

The model you print

Abbey Church of Sainte-Foy in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
13 mm
Scale
1:3,750

13 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Pyramid-roofed towers

    The two west towers and the octagonal crossing tower end in sharp pyramid roofs. Print slowly with good cooling, and use a layer height of 0.12–0.16 mm to keep the tips crisp.

  2. Rounded apse and small chapels

    The curved apse and its small side chapels are fine, shallow detail. A larger print keeps them, and Full detail suits a fine nozzle; Print friendly adapts them to the print scale.

  3. One piece with the ground

    The Abbey Church of Sainte-Foy is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Abbey Church of Sainte-Foy takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Abbey Church of Sainte-Foy

Pilgrims on the Way of St. James, the route to Santiago de Compostela (in present-day Spain), often stopped at this church in Conques, France. Medieval visitors came above all to see the relics of Sainte Foy, who was a young woman martyred in the fourth century. Her relics came to Conques by theft in 866. One monk from the abbey spent nearly a decade in Agen, posing as a loyal monk there, to get close to the relics.

The abbey began to decline from the 13th century, as other saints grew more popular than Saint Faith and Conques sat in a marginal location. In 1568 Protestants took Conques during the Wars of Religion and burned much of the abbey, among it the original towers. The Revolution and the banishment of the canons brought more destruction, as villagers who were by then poor quarried the buildings. Thanks to the efforts of Prosper Mérimée and Étienne Boissonnade, among others, the church was saved, then restored, with the present towers built in the process, and handed back to the Premonstratensians.

At Conques the first monastery building was an oratory of the eighth century, built by monks who were fleeing the Saracens in Spain. That chapel was torn down in the eleventh century to make room for a much larger church, once the relics had shifted the pilgrimage route from Agen to Conques. The finished church is a basilica plan modified into a cruciform plan. It measures 59 meters (193 ft 7 in) on the outside, and the crossing tower rises 26.40 meters (86 ft 7 in). France has classified it as a national monument since 1840.

About this model

The Abbey Church of Sainte-Foy is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits