3D print Air Mobility Command Museum Hangar 1301
A free, printable model of Hangar 1301, its barrel-vaulted roof and tall end walls, and the lawns, roads and neighboring buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Air Mobility Command Museum Hangar 1301
At Dover Air Force Base in Delaware stands the Air Mobility Command Museum, a military aviation museum covering the Air Transport Command, the Military Air Transport Service, the Military Airlift Command and the Air Mobility Command. It settled into Hangar 1301 in June 1996, leaving the three hangars it had used in the base's main area.
Its roots lie in a restoration project started in 1978 by 512th Military Airlift Wing members. They restored a B-17G named Shoo Shoo Shoo Baby to flying condition over ten years. Plans for a permanent display led to the Dover AFB Historical Center, established on October 13, 1986, and a C-47 was airlifted in just three days later. The U.S. Air Force recognized it as a museum in 1995, and in February 1997 it took the name Air Mobility Command Museum.
Among its attractions are a flight simulator, a commemoration park outside the building and a retired control tower cab that handled Dover AFB's air traffic between 1956 and 2009. The collection has a full set of the significant Lockheed air lifters that both the Air Force and the Army have used since World War II, and several of the aircraft are the only, first or last of their type.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 4 mm | 1:3,750 |
| 200 mm | 4 mm | 1:3,000 |
| 256 mm | 6 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- A smooth barrel roof
- The hangar is a single long curved roof between two tall end walls. A layer height of 0.12–0.16 mm keeps the curve smooth, and a larger print keeps the fine ribs on the end walls.
- Tall end walls
- The two end walls rise above the roof and carry fine vertical lines. Print friendly keeps them sturdy at small sizes; Full detail shows more of the pattern on bigger prints.
- One piece with the ground
- Air Mobility Command Museum Hangar 1301 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Air Mobility Command Museum Hangar 1301 takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Air Mobility Command Museum Hangar 1301 is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Air Mobility Command Museum Hangar 1301 STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Air Mobility Command Museum Hangar 1301 grows with the print: about 4 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
