3D print Angkor Wat
A free, printable model of Angkor Wat and the green ground, ponds and paths around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Angkor Wat
Angkor Wat is a temple complex in Siem Reap, Cambodia. Its site covers 162.6 hectares (1.6 km²; 401.8 acres), in Angkor, the medieval Khmer capital. It began as a Hindu temple devoted to Vishnu under the Khmer king Suryavarman II, and was completed in 1150 CE. Later, as Khmer kings adopted Buddhism, it was gradually transformed into a Theravada Buddhist temple. It is still a Buddhist monastery and a place of active worship, and no other religious complex in the world is larger.
Suryavarman II commissioned it in the Khmer capital as a state temple, and it is generally thought to have been meant as his mausoleum. The design blends two Khmer forms, the temple-mountain and the galleried temple, and its layout is commonly read as symbolizing Mount Meru. A broad moat and an outer wall enclose the complex. Inside, three galleries, each higher than the last, climb toward a central quincunx of towers. Unlike most Angkorian temples, it faces west.
After the temple complex fell into disuse, restoration began in the 20th century. It was coordinated by ICC-Angkor, a committee set up under UNESCO in 1993, with contributors including France, Japan, India, Germany, the United States, South Korea, China and Italy. Extensive bas-reliefs and devatas decorate its walls. The temple appears on the Cambodian national flag, and in 1992 the Angkor area received UNESCO World Heritage Site status.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 21 mm | 1:3,750 |
| 200 mm | 26 mm | 1:3,000 |
| 256 mm | 34 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Five towers with fine tiers
- The five central towers taper in tiers and are the tallest, most delicate parts. Print friendly adapts them to the print scale; Full detail keeps every tier on larger prints, and 0.12 to 0.16 mm layers keep the tips crisp.
- Wide and low with small roofs
- The temple spreads out far wider than it is tall, with many small gallery roofs and gateways. A larger print size keeps that repeating detail readable; at small sizes it can soften.
- One piece with the ground
- Angkor Wat is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Angkor Wat takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Angkor Wat is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Angkor Wat STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Angkor Wat grows with the print: about 21 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
