3D print the Ariake Gymnastics Centre
A free, printable 3D model of the Ariake Gymnastics Centre in Tokyo, generated from real map data in your browser and set among the surrounding streets and buildings.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A larger print for the arena
A larger print helps the arena read clearly at this scale. Layers of 0.12–0.16 mm keep the vertical walls crisp.
- One piece with the ground
The Ariake Gymnastics Centre is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Ariake Gymnastics Centre takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Ariake Gymnastics Centre
The Ariake GYM-EX in Tokyo began as the Ariake Gymnastics Centre, a sports arena that has since become an exhibition hall. It stands in the Ariake district of Tokyo and opened in October 2019. It was built for gymnastics at the 2020 Summer Olympics and for boccia at the 2020 Summer Paralympics.
After the Games, the Tokyo Metropolitan Government turned the venue into an exhibition hall and gave it the Ariake GYM-EX name, aiming to support smaller businesses around Tokyo. Tokyo Big Sight began managing the venue in 2023. Nikken Sekkei and Shimizu Corporation designed the building, which is recorded with a capacity of 1,200 and steel as its material.
About this model
The Ariake Gymnastics Centre is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
