3D print Roppongi Hills Mori Tower
A free, printable model of Roppongi Hills Mori Tower, its curved shaft and rooftop helipad, with the dense low buildings and curving roads around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Roppongi Hills Mori Tower
Roppongi Hills Mori Tower is a mixed-use skyscraper with 54 stories in Roppongi, in Minato, Tokyo, Japan. It was finished in 2003, is named for its builder, Minoru Mori, and is the central building of Roppongi Hills, an urban development. The tower stands 238 meters (781 ft) tall. Its floor area is 379,408 square meters, or 4,083,910 sq ft, which by that yardstick puts it among the largest buildings anywhere.
Offices are the main use. Floors 7 to 48 hold office space, while the lowest six floors hold shops and restaurants. The Mori Arts Center occupies floors 49 to 54: the Mori Art Museum is on the 53rd floor, the observation deck Tokyo City View is on the 52nd, and an open-air roof deck is on the 54th. The museum anchors the arts center and opened in October 2003. Gluckman Mayner Architects designed its interior, and it first took up the whole 53rd floor and part of the 52nd. The headquarters of Mori Building Company is also in the tower.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 66 mm | 1:3,750 |
| 200 mm | 82 mm | 1:3,000 |
| 256 mm | 105 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Rooftop helipad and masts
- Thin masts and railings ring the helipad on the roof. Print friendly adapts thin parts like these to your print scale; Full detail keeps them, best on a larger print with 0.12 to 0.16 mm layers.
- Tall curved shaft
- The shaft swells slightly and then narrows toward the top. Slow printing with good cooling keeps the upper floors clean, and fine layers keep the curve smooth.
- One piece with the ground
- Roppongi Hills Mori Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Roppongi Hills Mori Tower takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Roppongi Hills Mori Tower is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Roppongi Hills Mori Tower STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Roppongi Hills Mori Tower grows with the print: about 66 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
