3D print the Asakusa Mosque
A free, printable model of the Asakusa Mosque, a mosque among the surrounding streets and buildings of downtown Tokyo, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- City mosque at small sizes
At the default print size, Print friendly adapts the smaller details of a city mosque; Full detail keeps them on a larger print.
- Layer height for edges
A layer height of 0.12–0.16 mm keeps vertical wall edges and the roofline crisp, especially on a small model.
- One piece with the ground
The Asakusa Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Asakusa Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Asakusa Mosque
The Asakusa Mosque, officially the Daar Al-Arqam Mosque and also called Masjid Asakusa, stands in Asakusa, in downtown Tokyo. It was completed in 1998 and is run by the Japan Mosque Foundation, which is a department within the Islamic Circle of Japan. The mosque holds salat and Friday prayers and also offers other services and classes for its followers.
It sits in central Tokyo, within 2 kilometers (1.2 mi) of Tokyo Skytree and 500 meters (1,600 ft) from Sumida Park. Minami Senju metro station is less than 15 minutes away on foot, and bus stations at Imado and Higashi Asakusa are nearby. This central setting places the mosque close to these landmarks and transport stops.
About this model
The Asakusa Mosque is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
