3D print the Ashaghi Govhar Agha Mosque
A free, printable 3D model of the Ashaghi Govhar Agha Mosque, its hipped-roof hall and two slim minarets on a bare plot with nearby buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Ashaghi Govhar Agha Mosque in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender patterned minarets
Both minarets are tall, thin and carry a lattice pattern. Print slowly with cooling at 0.12–0.16 mm layers, and use Full detail on a larger print to keep the pattern and the balcony tops.
- One piece with the ground
The Ashaghi Govhar Agha Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Ashaghi Govhar Agha Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Ashaghi Govhar Agha Mosque
In Shusha, Azerbaijan, the Ashaghi Govhar Agha Mosque takes its name ("Lower Govhar Agha Mosque") from its place in the lower part of the town, which sets it apart from the similarly named Yukhari Govhar Agha Mosque in the upper part.
Govhar Agha, a daughter of Ibrahim Khalil Khan of the Karabakh Khanate, ordered the mosque, and it was completed about eight years before the Yukhari mosque. A visible difference is the minarets: here they stand at the rear corners of the building, while the Yukhari mosque has them on its front facade.
The mosque, with its minarets at the rear corners, was seriously damaged by heavy shelling and was reported to be in a semi-destroyed state in 2005–2007. After that, restoration work was finished in 2024 with financial backing from the Heydar Aliyev Foundation.
About this model
The Ashaghi Govhar Agha Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





