A white 3D print of the Imamzadeh Complex (Ganja), a domed building with two tall minarets, standing on open ground among green land and scattered small buildings.

3D print Imamzadeh Complex (Ganja)

A free, printable model of the Imamzadeh Complex (Ganja), with its domes and two tall minarets, on open ground among scattered small buildings and green land, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Imamzadeh Complex (Ganja) model, North view North
  • Imamzadeh Complex (Ganja) model, East view East
  • Imamzadeh Complex (Ganja) model, South view South
  • Imamzadeh Complex (Ganja) model, West view West

© OpenStreetMap contributors

The model you print

Imamzadeh Complex (Ganja) in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
12 mm
Scale
1:3,750

12 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Two tall slender minarets

    The two minarets are thin, ringed shafts with small balconies and pointed caps. Print friendly adapts them to the print scale; print slowly with good cooling, and use Full detail on a larger print.

  2. Domes and pointed arches

    Several domes sit on drums, and the walls have rows of narrow pointed windows. A layer height of 0.12–0.16 mm and a bigger print size keep them crisp.

  3. One piece with the ground

    Imamzadeh Complex (Ganja) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Imamzadeh Complex (Ganja) takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Imamzadeh Complex (Ganja)

Lying 7 km (4.3 mi) from Ganja, Azerbaijan, to the north, the Imamzadeh Complex ranks as an important Islamic site and a holy place in Shia Islam. It stands inside a state historical and cultural reserve. Its parts are a mausoleum with the grave of a major Shia Islam figure, mosques that include the Goy Imam Mosque, a garden, walls with gates, and assorted funerary monuments.

The Imamzadeh Mausoleum lies inside the Goy Imam Mosque and holds the grave of Imamzadeh Ibrahim, a son of Imam Muhammad al-Baqir, whom Shia Muslims count as their fifth Imam. It was built in the 8th century. An inscription says al-Baqir’s sons left their homeland for Azerbaijan and Iran, fleeing persecution by Umayyad Caliphate rulers (661-750). Ibrahim and Ismail reached Ganja and Barda, where enemies killed them, and mausoleums were raised over their graves.

The mausoleum is of the tower-cupola type and is made of red bricks. A two-story arch, dating from the 17th century, wraps around it on three sides. Blue and green tiles decorate the dome and its cylindrical body, additions of the 14th to 17th centuries. Major renovations took place under Javad Khan (1786–1804), in 1878–1879, and between 2010 and 2016.

About this model

Imamzadeh Complex (Ganja) is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits