3D print Bartow–Pell Mansion
A free, printable model of the Bartow–Pell Mansion, with its wings, chimneys and the green grounds and paths around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Bartow–Pell Mansion
The Bartow–Pell Mansion is a house museum on Shore Road in the Bronx, New York City, at the northern end of Pelham Bay Park. Its two stories date from the mid-19th century, and the architect is unknown. The facade is Greek Revival, the interiors are Federal in style, and no other manor house survives in the area. Robert Bartow, who was related to the Pell family, put up this house at some point from 1836 to 1842.
Thomas Pell bought the estate from the native Siwanoy in 1654, and the Pell family built two earlier residences on it, in 1675 and 1790. The Bartow and Pell families held the property until New York City's government bought it in 1888. Empty until 1914, it was then leased by the International Garden Club, which converted it to a clubhouse and took up residence there in 1915. Mayor Fiorello La Guardia spent the summer of 1936 there, and part of the house opened as a museum in May 1946.
Wings extend from either side of the main block, which sits on a north-south axis, and the stone facade has balconies and large windows. Inside, an elliptical staircase rises in the square central hall of the first floor. The grounds cover 9 acres (3.6 ha). On them stand a carriage house of three stories, terraced gardens that look out toward Long Island Sound, and a small Pell family burial plot. The facade, interior and grounds are a New York City landmark and a National Historic Landmark.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 4 mm | 1:3,750 |
| 200 mm | 5 mm | 1:3,000 |
| 256 mm | 7 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Chimneys and thin balcony rails
- The roofs carry several slim chimneys, and the balconies have fine railings. "Print friendly" adapts these thin parts to the print scale; "Full detail" keeps them, which suits a larger print.
- Small model, fine facade
- This is a low building, so it prints small. A layer height of 0.12–0.16 mm keeps the stone corner blocks and window lines readable.
- One piece with the ground
- Bartow–Pell Mansion is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Bartow–Pell Mansion takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Bartow–Pell Mansion is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Bartow–Pell Mansion STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Bartow–Pell Mansion grows with the print: about 4 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
