A white 3D print of the Basilica of San Francesco, Arezzo, a long church with a steep gabled roof and tall arched windows, set among closely packed buildings.

3D print the Basilica of San Francesco, Arezzo

A free, printable model of the Basilica of San Francesco, a long gabled church with tall arched windows, and the closely packed buildings around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Basilica of San Francesco, Arezzo model, North view North
  • Basilica of San Francesco, Arezzo model, East view East
  • Basilica of San Francesco, Arezzo model, South view South
  • Basilica of San Francesco, Arezzo model, West view West

© OpenStreetMap contributors

The model you print

Basilica of San Francesco, Arezzo in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
8 mm
Scale
1:3,750

8 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Narrow arched windows

    Tall, narrow arched windows run along the long walls and are very small details. A bigger print and a layer height of 0.12-0.16 mm keep them readable; Full detail keeps every one.

  2. Round window on the front

    The south end carries a circular window with a cross and fine horizontal courses. Print friendly adapts these shallow lines to the print scale; use Full detail on larger prints.

  3. One piece with the ground

    The Basilica of San Francesco, Arezzo is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Basilica of San Francesco, Arezzo takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Basilica of San Francesco, Arezzo

Arezzo, Tuscany, Italy, is home to the Basilica of San Francesco, a late Medieval church dedicated to Saint Francis of Assisi. It is the second church the Franciscans built in Arezzo; an earlier one stood outside the city walls and was destroyed during the Occupation. Building work began around 1290, and the planned decoration of the facade was never realized. Simple and unadorned in design, the large interior has a wide single nave, with some chapels on the left and niches on the right. The tall chancel has a groin vault over a square plan.

A smaller Lower Church beneath it, like the one at Assisi, has a nave and two aisles. An unusually large painted rood crucifix by an artist known as the Master of San Francesco, who worked in Cimabue's time, hangs at the chancel entrance, and the church also holds a Maesta by Guido da Siena showing the Madonna in Majesty. Some of the fresco decoration on the walls and in the right-hand niches is partly 14th century.

The church is especially renowned for Piero della Francesca's fresco cycle Legend of the True Cross in its chancel, one of the masterworks of the Italian Early Renaissance. The Bicci family commissioned the painting and called in Bicci di Lorenzo, who died in 1452 with only part of the vault done. Piero della Francesca completed the work in two stages, pausing in 1458-1459 and finishing in 1466. The frescoes fill three levels around a large window and follow the Golden Legend of Jacobus de Voragine.

About this model

The Basilica of San Francesco, Arezzo is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits