3D print the Chelsea Hotel, Toronto
A free, printable 3D model of the hotel and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Chelsea Hotel, Toronto in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 84 m
- On a 160 mm print
- 23 mm
- Scale
- 1:3,750
84 m of the Chelsea Hotel, Toronto, 23 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall block with fine edges
A hotel tower is a tall block, so printing slowly with cooling on keeps the upper floors clean. A layer height of 0.12–0.16 mm keeps vertical edges crisp.
- Print size and small details
Use Full detail on a larger print to keep small features. Print friendly adapts thin parts for small prints.
- One piece with the ground
The Chelsea Hotel, Toronto is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Chelsea Hotel, Toronto takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Chelsea Hotel, Toronto
The Chelsea Hotel, Toronto, is described as the largest hotel in Canada. Its address is 22 Elm Street, Toronto, Ontario. The building has 24 floors and stands 83.72 meters (274.7 ft) tall, with 1,590 guest rooms and suites, 5 basements and 18 elevators.
The Canada Mortgage and Housing Corporation first funded the structure, which was meant to be a student housing cooperative, and was then planned as a residential condo building. It finally opened its doors on October 15, 1975, as a hotel run by Delta Hotels under the name Delta's Chelsea Inn. Great Eagle Holdings of Hong Kong bought it in 1996. On July 1, 2013, it became the Eaton Chelsea, and in 2016 it was renamed Chelsea Hotel Toronto.
About this model
The Chelsea Hotel, Toronto is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
