A white 3D print of the Berlaymont building, a large building with several wide arms and round rooftop discs, surrounded by tall city blocks and a roundabout.

Berlaymont building in 3D

The Berlaymont building appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Berlaymont building model, North view North
  • Berlaymont building model, East view East
  • Berlaymont building model, South view South
  • Berlaymont building model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Berlaymont building may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
17 mm
Scale
1:3,750

17 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Long, finely ribbed facades

    The wide arms are covered in many thin horizontal lines for the floors. Print friendly adapts them to the print scale; Full detail keeps them on a larger print, and a 0.12-0.16 mm layer height helps.

  2. Rooftop discs

    A few round discs and small blocks sit on top of the roof. A larger print size keeps these small details from blurring together.

  3. One piece with the ground

    The Berlaymont building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Berlaymont building takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Berlaymont building

The Berlaymont, an office block in Brussels, Belgium, serves as headquarters of the European Commission, the European Union's executive branch. Its address is 200, rue de la Loi/Wetstraat, on the Robert Schuman Roundabout, within the European Quarter. The Commission's official emblem uses the building's unique form. The name comes from the old Ladies of Berlaymont convent, which stood on the site.

The Berlaymont stands as a symbol of Europe's presence in Brussels. The Commission is spread over some 60 buildings or so, yet this one is where its president and the College of Commissioners sit. The president's office and the boardroom are on floor 13.

Belgium's government offered to build a large administration complex to keep the European Economic Community's Commission in the city. The chosen land was occupied by a 300-year-old convent that ran a girls' boarding school; the Ladies of Berlaymont handed the site over in November 1963. The first wing, in the north-east, was completed on February 1, 1967, the lease began on May 1, 1967, and the building was fully occupied at the start of September that year. When flaked asbestos was found in 1990, demolition was ruled out, since the foundations secured the local road and metro systems.

About this model

The Berlaymont building is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Brussels

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits