3D print the Billiou–Stillwell–Perine House
A free, printable model of the Billiou–Stillwell–Perine House, a small house with several roofs and chimneys, and the road and open ground around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A very small house
The house is tiny compared with most landmarks, with several small chimneys, dormers and a porch. A larger print size keeps these details, and Full detail keeps every one.
- Shingled roofs
The sloping roofs carry fine shingle lines. A layer height of 0.12 to 0.16 mm keeps them crisp.
- One piece with the ground
The Billiou–Stillwell–Perine House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Billiou–Stillwell–Perine House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Billiou–Stillwell–Perine House
Staten Island's oldest standing building is the Billiou–Stillwell–Perine House, a Dutch Colonial structure. Pierre Billiou, who built it, was a Huguenot refugee from religious persecution in Europe; he reached New Amsterdam in 1661. Once he obtained a land grant on Staten Island, he built the first stone part of the house about 1662.
His daughter Martha inherited the property and lived there with her husband, Thomas Stillwell. Later she lived with a second husband, Rev. David de Bonrepos. Around 1680 the landowner Thomas Stillwell, a man of means, enlarged the house, and it saw further expansions up to 1830. The Brittons, who descended from Stillwell and Martha, kept it until the middle of the 18th century. Edward Perine acquired it in 1758, and his family held it until 1913, and in 1915 the Staten Island Antiquarian Society took the house; the Staten Island Historical Society followed in 1922 after merging with it.
Inside, a high fireplace without jambs has a large stone hearth, and the ceiling has exceptionally big beams. The sloping roof is shingled, and the roof was restored in 2013. Historic Richmond Town owns the house, which is a Dutch Colonial structure on Staten Island.
About this model
The Billiou–Stillwell–Perine House is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
