3D print the Orta Cami Mosque
A free, printable model of the Orta Cami Mosque and its tall minaret, with the streets and houses around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Orta Cami Mosque in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender minaret
The tall, thin minaret with its pointed cap is the most delicate part of this model. Print slowly with good cooling, use 0.12–0.16 mm layers, and choose Full detail on a larger print to keep it crisp.
- Pointed-arch windows
A row of small pointed-arch windows runs along the prayer hall. Print friendly adapts them to the print scale; a bigger print keeps them open.
- One piece with the ground
The Orta Cami Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Orta Cami Mosque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Orta Cami Mosque
Among the oldest mosques in Crimea is the Orta Cami Mosque, also spelled Orta Camii in Turkish. It is in the old town of Bakhchysarai, on Lenina Street. Once the main Friday prayer mosque of the capital of the Crimean Khanate, it is first mentioned in 1674, when it was a ma'ale mosque, meaning the main mosque of its district.
The mosque fell into bad condition, and its minaret and some small surrounding buildings were completely destroyed. Reconstruction started at the end of 2012, and the Hajji Enver Umerov - Omer Kirimli family paid for it. The work included rebuilding the minaret from scratch, along with some minor buildings that had previously stood next to the mosque.
About this model
The Orta Cami Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring
More landmarks to print
Place of worshipSaint Basil's CathedralMoscow
Castle or houseWinter PalaceSt Petersburg
Airport or hangarYuzhno-Sakhalinsk Airport Old TerminalYuzhno-Sakhalinsk
Castle or housePeter and Paul FortressSt Petersburg
Place of worshipChurch of the Savior on Spilled BloodSt Petersburg
Place of worshipChurch of All Saints, YekaterinburgYekaterinburg