A white 3D print of the Birthplace of Anton Chekhov, a low house with a hipped roof, a chimney and small roof projections, on a grassy plot among nearby buildings.

Birthplace of Anton Chekhov in 3D

The Birthplace of Anton Chekhov appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Birthplace of Anton Chekhov model, North view North
  • Birthplace of Anton Chekhov model, East view East
  • Birthplace of Anton Chekhov model, South view South
  • Birthplace of Anton Chekhov model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Birthplace of Anton Chekhov may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
1 mm
Scale
1:3,750

1 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Low house, small details

    This is a low single building, so most of its relief is in the roof, the chimney and the window frames. A larger print size keeps them; Print friendly adapts them when printing small.

  2. One piece with the ground

    The Birthplace of Anton Chekhov is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Birthplace of Anton Chekhov takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Birthplace of Anton Chekhov

The house in Taganrog, Russia, in which the writer Anton Chekhov was born is a historic building. It is a writer's house museum, and Russia lists it as a federal cultural heritage site. The address is Chekhov Street 69.

In 1916 the Taganrog City Council backed an initiative by the Chekhov Circle, and the council acquired the property, house and grounds, to conserve the writer's home. In December 1920 the house was cleared of its tenants, and renovation work took place in 1921. On January 29, 2010, during festivities for the 150th anniversary of the writer's birth, President Dmitri Medvedev of Russia visited the memorial museum in the house.

About this model

The Birthplace of Anton Chekhov is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits