Ufa railway station in 3D
The Ufa railway station appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Ufa railway station may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Large ribbed dome
The big dome at one end has fine ribs. Print slowly with good cooling, and use Full detail on a larger print to keep the ribs; Print friendly simplifies them at small sizes.
- Long ribbed frontage
The long frontage has many slim vertical ribs and small rooftop pieces. 0.12–0.16 mm layers keep them crisp, and a bigger print size helps them survive.
- One piece with the ground
The Ufa railway station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Ufa railway station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Ufa railway station
Ufa railway station is the central railway terminus of Ufa, in its Sovetsky District. It lies along the historical route of the Trans-Siberian Railway, and for management purposes it belongs to the Kuybyshev Railway, in its Bashkir region. The station's history is tied to the Samara-Ufa railway, begun in 1885 and brought to the city in 1888. That year the station began working as the line's final stop.
The Ufa-Zlatoust section followed in 1890 and the Zlatoust-Chelyabinsk section in 1892. After the Siberian railway and the Yekaterinburg-Chelyabinsk branch opened to traffic in 1896, and until the Petersburg-Vologda-Vyatka railway opened in 1906, the station stood on the only rail link between Russia and Europe on one side and the Far East, Siberia and the Urals on the other.
The site was fixed in 1885. The first building, in an eclectic style by the architect F. F. Essen, served from 1888 to 1967. The present building went up in 1968 to a project by K. Gottlieb. Reconstruction started in May 2006, and the renovated station's first stage opened on December 17, 2008.
About this model
The Ufa railway station is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





