3D print the Brooklyner
A free, printable 3D model of the Brooklyner and the surrounding towers and streets, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 162 m
- On a 160 mm print
- 44 mm
- Scale
- 1:3,750
162 m of the Brooklyner, 44 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small rooftop structures
The roof carries a stack of small boxes. Print friendly adapts them to the print scale; Full detail keeps them, which suits a larger print size.
- Even floor lines
Fine horizontal floor lines run the whole shaft. Use a layer height of 0.12 to 0.16 mm to keep them crisp.
- One piece with the ground
The Brooklyner is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Brooklyner takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Brooklyner
The Brooklyner, a 51-story skyscraper reaching 531.5 feet (162.0 meters), has the address 111 Lawrence Street in the Downtown Brooklyn area of New York City. It holds 491 rental units. The Clarett Group built it, with GKV Architects as designers, WSP Cantor Seinuk as structural engineers and Langan Engineering as geotechnical engineers.
In 2010 it became Brooklyn's tallest building, overtaking the Williamsburgh Savings Bank Tower. In 2014, 388 Bridge Street took over as the borough's tallest skyscraper. Milrose Consultants provided code consulting and municipal filing services during development and construction.
About this model
The Brooklyner is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
