A white 3D print of the Candelária Church, with its twin bell towers and large ribbed dome, set among tall buildings with a strip of green and a curving road beside it.

3D print the Candelária Church

A free, printable model of the church with its twin bell towers and big dome, and the tall buildings and streets around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Candelária Church model, North view North
  • Candelária Church model, East view East
  • Candelária Church model, South view South
  • Candelária Church model, West view West

© OpenStreetMap contributors

The model you print

Candelária Church in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
23 mm
Scale
1:3,750

23 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Twin towers and dome lantern

    The two bell towers and the big dome each end in a thin pointed top. Print slowly for these thin tips, and use Full detail on a larger print to keep them; Print friendly adapts them at small sizes.

  2. One piece with the ground

    The Candelária Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Candelária Church takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Candelária Church

Candelária Church is a historic and important Roman Catholic church in Rio de Janeiro, in the southeast of Brazil. Its construction and decoration stretched from 1775 into the late 19th century, and its Portuguese colonial Baroque façade pairs with a later Neoclassical and Neo-Renaissance interior. A quasi-legendary story says that around the start of the 17th century a ship named Candelária nearly sank in a storm, and a Portuguese couple paid for a small chapel to keep a vow made during it.

In the 18th century's second half, the old chapel needed repair, and Francisco João Roscio, a Portuguese military engineer, took charge of plans for a new, larger building. Work began in 1775; the still-unfinished church was inaugurated in 1811 with King John VI of Portugal present. The dome over the crossing was finished only in 1877. It and its eight statues are white Lioz stone, made in Lisbon, and on completion it was the city's tallest structure.

The church follows a Latin cross plan, with a dome over the transept and a nave of three aisles. Its main façade shows Baroque influence in the windows, doors and towers, and neoclassical influence in its flat, two-dimensional look and triangular pediment. Dark granite details stand out against whitewashed wall segments. In 1984 the Diretas Já campaign for direct presidential elections was attended by over a million people, and a plaza outside the church held the official cauldron of the 2016 Summer Olympics.

About this model

The Candelária Church is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Rio de Janeiro

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits