A white 3D print of the Old Cathedral of Rio de Janeiro, with its tall bell tower and pitched roof among tall downtown buildings, with a green square to the west.

Old Cathedral of Rio de Janeiro in 3D

The Old Cathedral of Rio de Janeiro appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Old Cathedral of Rio de Janeiro model, North view North
  • Old Cathedral of Rio de Janeiro model, East view East
  • Old Cathedral of Rio de Janeiro model, South view South
  • Old Cathedral of Rio de Janeiro model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Old Cathedral of Rio de Janeiro may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
20 mm
Scale
1:3,750

20 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Slender bell tower

    The tower is tall and narrow, with a small dome and finial on top. Print friendly adapts these small parts to the print scale; Full detail suits larger prints. Printing slowly helps the top.

  2. Crowded by taller buildings

    Tall neighboring buildings stand close, and the church is hidden from the south side. A layer height of 0.12-0.16 mm keeps the carved façade relief readable.

  3. One piece with the ground

    The Old Cathedral of Rio de Janeiro is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Old Cathedral of Rio de Janeiro takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Old Cathedral of Rio de Janeiro

Named for Our Lady of Mount Carmel, Rio de Janeiro's Old Cathedral is an old Carmelite church on Praça XV, in downtown Rio. It served as the city's cathedral from around 1808 until 1976. In the 19th century it also worked as the Royal Chapel of the Portuguese Royal Family and then the Imperial Chapel of the Brazilian Imperial Family. It is counted among the city's most important historic buildings.

The Carmelite Order came to Rio in 1590 and took over a small chapel close to Guanabara Bay. Work on the present church began around 1761, probably directed by the Portuguese architect Manuel Alves Setúbal, and it was consecrated in 1770 with its façade unfinished. The master Inácio Ferreira Pinto carved the gilded Rococo woodwork inside after 1785. Ornate woodwork covers the walls, chapels and ceiling, and oval paintings of the Apostles and a series of balconies line the nave.

Emperor Pedro I was crowned in the church on December 1, 1822, and Pedro II on July 18, 1841. These were the only two Christian coronation rites held on the South American continent. The façades were remodeled in the first decades of the 20th century. The Italian architect Rafael Rebecchi rebuilt the tower between 1905 and 1913, and a big statue of the Virgin Mary crowns the tower. Of the main façade, only the lower part with its three portals is original.

About this model

The Old Cathedral of Rio de Janeiro is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Rio de Janeiro

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits