A white 3D print of the Capitolio, a long building with a tall central dome and rounded end wings, set in gardens among city blocks and streets.

Capitolio in 3D

The Capitolio appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Capitolio model, North view North
  • Capitolio model, East view East
  • Capitolio model, South view South
  • Capitolio model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Capitolio may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

Real height
92 m
On a 160 mm print
27 mm
Scale
1:3,750

92 m of the Capitolio, 27 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Dome with a ring of columns

    The tall dome sits on a drum ringed with small columns and ends in a lantern. Layers of 0.12 to 0.16 mm keep the curve smooth, and Full detail keeps the columns on large prints.

  2. Long, low wings

    The wings stretch out to rounded ends far from the dome. A bigger print size keeps their facade detail; Print friendly adapts the small features to the print scale.

  3. One piece with the ground

    The Capitolio is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Capitolio takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Capitolio

The Capitolio, formally the National Capitol of Cuba, is a public building in Havana. President Gerardo Machado commissioned it, and Eugenio Rayneri Piedra directed its construction from 1926 to 1929 on land that had been a railroad terminal. The U.S. firm Purdy and Henderson oversaw construction, which took more than 5000 workers and about 17 million American dollars.

It measures 207 meters in length and 91 meters in width. People often liken it to the United States Capitol, though it is not a copy. The stone-clad dome on a steel frame rises almost 92 m (302 ft), the highest point in Havana until the FOCSA Building of 1956, and when built it ranked as the world's third-highest dome. Rayneri Piedra traced its inspiration to the Panthéon in Paris.

A broad granite staircase, flanked by statues by Angelo Zanelli, climbs to a portico with 12 Ionic granite columns. Under the dome stands Zanelli's gilded bronze Statue of the Republic, ranked as the world's third largest statue indoors. A replica diamond set in the floor of the main hall marks Kilometre Zero for Cuba.

About this model

The Capitolio is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits