3D print the Cathedral of Saints Peter and Paul, Petergof
A free, printable 3D model of the Saints Peter and Paul Cathedral in Petergof and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Cathedral of Saints Peter and Paul, Petergof in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 70 m
- On a 160 mm print
- 19 mm
- Scale
- 1:3,750
70 m of the Cathedral of Saints Peter and Paul, Petergof, 19 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slow layers for tall spires
A tall church with a pointed roof prints most cleanly at 0.12–0.16 mm layers and a slower speed near the top. Print friendly keeps thin upper parts sturdy at small sizes.
- One piece with the ground
The Cathedral of Saints Peter and Paul, Petergof is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Cathedral of Saints Peter and Paul, Petergof takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Cathedral of Saints Peter and Paul, Petergof
Petergof, also spelled Peterhof, is home to the Russian Orthodox Cathedral of Saints Peter and Paul. Emperor Alexander III approved the design in 1893. Civil engineer Nikolai Sultanov designed it in the Russian Revival style, and it was completed in 1905.
The cathedral was closed in 1935 and was badly damaged in World War II after German troops used it to house artillery. After a restoration, services resumed there in 1990. It is a brick, tented-roof church 70 m tall and a regional cultural heritage site in Russia.
About this model
The Cathedral of Saints Peter and Paul, Petergof is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
