3D print Centennial Hills Hospital
A free, printable model of Centennial Hills Hospital, with the street grid and neighboring buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Centennial Hills Hospital
In the Las Vegas neighborhood of Centennial Hills, at 6900 North Durango Drive, stands Centennial Hills Hospital Medical Center, close to U.S. Route 95 (Interstate 11), as well as Clark County 215. With 226 beds and 32,900 m² (354,000 sq ft) of space, the hospital also has a campus with two medical office buildings. Its eight-story tower opened on January 21, 2008, later than the original plan of autumn 2007, and it was built with 4,800 m² (52,000 sq ft) of space set aside for future expansion.
The hospital was the first medical facility in Nevada to offer the O-arm scanning system, and its campus was Nevada's first to be tobacco-free. A helipad serves emergency air ambulances. Services include an emergency department, a women's center with a level II NICU, cardiology and orthopedic surgery.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 11 mm | 1:3,750 |
| 200 mm | 13 mm | 1:3,000 |
| 256 mm | 17 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Flat roofs with small boxes
- The flat roofs carry many small rooftop boxes. Print friendly adapts these small details to the print scale; Full detail keeps them on a larger print.
- A low, wide complex
- The wings are low and wide, so a larger print size helps. Layers of 0.12–0.16 mm keep the roof edges and the entrance canopy crisp.
- One piece with the ground
- Centennial Hills Hospital is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Centennial Hills Hospital takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Centennial Hills Hospital is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Centennial Hills Hospital STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Centennial Hills Hospital grows with the print: about 11 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
