Central railway station, Sydney in 3D
Central railway station, Sydney appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Central railway station, Sydney may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 22 mm
- Scale
- 1:3,750
22 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Clock tower and arched windows
The slim clock tower and the long row of arched windows are the finest details. Print friendly adapts them to the print scale; printing slowly helps the tower, and 0.12–0.16 mm layers keep the arches crisp.
- One piece with the ground
Central railway station, Sydney is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Central railway station, Sydney takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Central railway station, Sydney
Central is a heritage-listed station in the middle of Sydney, New South Wales, Australia. It is the largest and busiest railway station in Australia. Its services include NSW TrainLink inter-city trains, Sydney Trains commuter trains, Sydney Metro and Sydney Light Rail, along with buses and private coaches. Platforms 1 to 12 are also known as Sydney Terminal. The station joined the State Heritage Register of New South Wales on April 2, 1999.
A large city block holds the station, set between Haymarket, Surry Hills and the city's central business district. Eddy Avenue forms the north edge, Elizabeth Street the east edge, the Devonshire Street Tunnel the south edge, and Railway Square and Pitt Street the west. The marshalling yards and some of the station reach south as far as Cleveland Street, on land that was once the Devonshire Street Cemetery.
Sydney has had three terminal stations. The first opened on September 26, 1855, as a temporary building of timber and corrugated iron. A second, more substantial brick station followed in 1874, again on the same site, and grew to 14 platforms before the present station, north of Devonshire Street, replaced it. Henry Deane, Engineer-in-Chief of Railway Construction, prepared the initial designs for the new terminal. His second scheme, which called for taking over the Devonshire Street cemeteries, was the one adopted.
About this model
Central railway station, Sydney is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





