3D print the Chongqing World Trade Center
A free, printable model of the Chongqing World Trade Center and the tall towers and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Chongqing World Trade Center in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 283 m
- On a 160 mm print
- 79 mm
- Scale
- 1:3,750
283 m of the Chongqing World Trade Center, 79 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Spire on a tall tower
A thin spire rises from the top of a tall, narrow shaft. Print slowly with good cooling for the upper floors, and a 0.12–0.16 mm layer height keeps the spire and roofline crisp.
- Wide podium, slender shaft
A broad podium carries the narrow tower. Larger prints keep the fine horizontal banding on the tower; "Print friendly" adapts small details to the print scale.
- One piece with the ground
The Chongqing World Trade Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Chongqing World Trade Center takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Chongqing World Trade Center
The Chongqing World Trade Center is a skyscraper in China's Chongqing, in the Jiefangbei CBD area. It stands 283.1 meters (929 ft) tall, including its spire. Without the spire the height is 262 meters (860 ft). The tower has 60 floors, and 12 elevators can reach all of them.
Construction started in 2002, the building was topped out in 2004, and it was finished in 2005 after three years of work. Two underground floors serve as a car park. The building has a retail podium, and an exit of Metro Line 2 opens there, at Linjiangmen Station.
About this model
The Chongqing World Trade Center is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
