3D print the Church of Peace in Jawor
A free, printable 3D model of the Church of Peace in Jawor, shown in green grounds crossed by paths with a few buildings nearby, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Church of Peace in Jawor in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 8 mm
- Scale
- 1:3,750
8 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Timber-framed walls
The walls show a pattern of thin diagonal timber beams. Use Full detail on a larger print to keep them, or Print friendly on a small one; 0.12–0.16 mm layers keep the lines crisp.
- Small lantern tower
The little lantern tower is a slim, tall feature. Print slowly with good cooling so its top forms cleanly.
- One piece with the ground
The Church of Peace in Jawor is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Church of Peace in Jawor takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Church of Peace in Jawor
In Jawor, Poland, stands a wooden Evangelical Lutheran church known as the Church of Peace, built with a wattle and daub structure in half-timbered construction. It was erected under the terms of the Peace of Westphalia, agreed in 1648 at the end of the Thirty Years' War.
Albrecht von Säbisch designed it, and construction ran from 1654 to 1655, using perishable materials: wood, straw and clay. Its Baroque interior includes an altar, a pulpit and a baptismal font. On the north and south sides, four stories of galleries are decorated with paintings of Old and New Testament scenes, castle landscapes and heraldic shields.
Of the three Churches of Peace raised after the Thirty Years' War, this one and the church in Świdnica are the two that survive. UNESCO added the church to its World Heritage List in 2001. Peace Concerts are organized in its historic interior every year from May to September.
About this model
The Church of Peace in Jawor is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





