3D print the Church of St. Barnabas, Irvington
A free, printable model of the Church of St. Barnabas with its tower, wings, lawn and parking loop, plus the nearby buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 17 m
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
17 m of the Church of St. Barnabas, Irvington, 5 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Square and round towers
The square tower and the small round tower beside it are the tallest, thinnest parts. Print friendly adapts them to the print scale; for Full detail, print larger and use a 0.12–0.16 mm layer height.
- One piece with the ground
The Church of St. Barnabas, Irvington is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Church of St. Barnabas, Irvington takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Church of St. Barnabas, Irvington
St. Barnabas is an Episcopal church in Irvington, New York. The complex sits west of North Broadway, just north of Main Street, with the Old Croton Aqueduct trailway running along its western edge. The main church has granite walls and a gabled slate roof, with lancet arched windows trimmed in limestone molding and tracery. A square crenelated tower 55 feet (17 m) tall rises at the center, and a smaller round tower, topped by a conical roof, stands at its southeast corner.
The Rev. John McVickar, who was friends with Washington Irving, bought land near Irving's estate, Sunnyside, and the two came up with the idea of a school and chapel there. McVickar took responsibility for the design, and the chapel was dedicated on St. Barnabas Day, June 2, 1853. He reportedly took St Martin's Church in Canterbury as his model. In 1858 the school was abandoned and the chapel became a parish church.
By 1863 the chapel was too small. Renwick & Sands, James Renwick Jr.'s firm, received the commission to enlarge it, adding the tower, transept and chancel; the original building survives as the nave. The first of its two Tiffany windows arrived in 1896, the lych gate followed three years later, and the parish hall was added in 1902. Its National Register of Historic Places listing came in 2000.
About this model
The Church of St. Barnabas, Irvington is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
