A white 3D print of the Church of St. Lawrence in Lohja, a stone church with a steep gabled roof and two small side porches, standing in grassy grounds with a few paths and roads nearby.

Church of St. Lawrence, Lohja in 3D

The Church of St. Lawrence, Lohja appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Church of St. Lawrence, Lohja model, North view North
  • Church of St. Lawrence, Lohja model, East view East
  • Church of St. Lawrence, Lohja model, South view South
  • Church of St. Lawrence, Lohja model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Church of St. Lawrence, Lohja may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
10 mm
Scale
1:3,750

10 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Fine stone texture on the walls

    The walls carry a pattern of stones and small arched windows. Full detail keeps them on a large print, while Print friendly simplifies them on a small one; 0.12-0.16 mm layers keep them crisp.

  2. Wide, steep roof

    The long gabled roof is a big smooth slope above the textured walls. A slower print speed and steady cooling help the ridge and gable tips come out clean.

  3. One piece with the ground

    The Church of St. Lawrence, Lohja is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Church of St. Lawrence, Lohja takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Church of St. Lawrence, Lohja

The Church of St. Lawrence (Lohjan Pyhän Laurin kirkko in Finnish) stands in Lohja, Finland, and ranks third among Finland's largest medieval parish churches. In the period before the Protestant Reformation brought Lutheranism to Finland, it belonged to the Roman Catholic Church. The dedication is to Lawrence of Rome.

Its early 16th-century murals place it among Finland's most valuable medieval buildings. Rustic and naive in style, they portrayed biblical stories for a population that could not read. In the early 19th century the windows were enlarged and the paintings were covered over with white chalk paint. That white paint was removed in the 1880s, and the colorful figures were repaired.

A bell tower stands at the southeast corner of the church. Its gray stone foot probably dates from the Middle Ages, while its wooden parts took their present form during the large repairs after the Great Northern War. German master builder Johann Friedrich Schultz oversaw the upper part around 1740. The tower holds three bells, cast in Tallinn in 1594, Lohja in 1624 and Stockholm in 1740.

About this model

The Church of St. Lawrence, Lohja is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits