3D print the Church of the Intercession at Fili
A free, printable 3D model of Fili's Church of the Intercession, generated in your browser from real map data, with the surrounding streets and buildings around it.
-
North
-
East
-
South
-
West
The model you print
Church of the Intercession at Fili in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 11 mm
- Scale
- 1:3,750
11 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Small roofs and curved parts
Small roofs and curved parts of a church model hold up better in larger prints; Full detail suits a fine nozzle, while Print friendly keeps small parts sturdy.
- One piece with the ground
The Church of the Intercession at Fili is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Church of the Intercession at Fili takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Church of the Intercession at Fili
Fili's Church of the Intercession is a Naryshkin Baroque church at 6 Novozavodskaya Street in Moscow, near Bolshaya Filyovskaya Street. The boyar Lev Naryshkin commissioned it on his suburban estate at Fili, an area that has belonged to the City of Moscow since 1935. It replaced a wooden church of 1619 established by Mikhail Romanov.
Construction ran from 1689 to 1694, and the building is shaped like a Greek cross, with short annexes that are rounded. In fact it holds two churches, one above the other: an Intercession Church for winter in the basement and, above it, an unheated summer church dedicated to the Saviour Not Made by Hands. A fire in 1712 destroyed all construction records, so the exact year of completion and the architect's name are unknown.
French troops damaged the church in 1812, and the Bolsheviks and World War II damaged it further. By 1945 it had lost its domes and crosses along with the upper octagonal layer. Exterior restoration took place in 1955-1971 and the interiors followed in 1971-1980; the church was painted pale red, though the original color scheme remains disputed.
About this model
The Church of the Intercession at Fili is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
