3D print the Grand Kremlin Palace
A free, printable model of the Grand Kremlin Palace and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Grand Kremlin Palace in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 19 mm
- Scale
- 1:3,750
19 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Wide building, fine detail
A wide palace building has fine facade and roof detail. Print friendly adapts it to the print scale; Full detail suits a larger print with a 0.12–0.16 mm layer height.
- One piece with the ground
The Grand Kremlin Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Grand Kremlin Palace takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Grand Kremlin Palace
Inside the Moscow Kremlin stands the Grand Kremlin Palace. It was built between 1837 and 1849 as the tsar's residence in Moscow, on Borovitsky Hill, where an estate of the Grand Princes had been set up in the 14th century. Konstantin Thon managed the team of architects who designed it. An earlier Baroque palace on the site had to be demolished to make room for it.
The palace stands 47 meters high and covers roughly 25,000 square meters in total. Its buildings are arranged as a rectangle around an inner courtyard. Though it looks three stories tall, it has only two; the upper floor has tall ceilings and a double row of windows. Within the complex are the older Terem Palace, nine churches that date to the 14th, 16th or 17th centuries, the Holy Vestibule and more than 700 rooms.
Georgievsky, Vladimirsky, Aleksandrovsky, Andreyevsky and Ekaterininsky: these five reception halls each take their name from an order of the Russian Empire. The Georgievsky Hall is used for official ceremonies and for state and diplomatic receptions, while the Vladimirsky Hall is where treaties between nations are signed. The palace is the Russian president's official working residence and also contains a museum.
About this model
The Grand Kremlin Palace is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
