3D print the Cirque d’Hiver Bouglione
A free, printable model of the Cirque d'Hiver Bouglione at 110 rue Amelot in Paris, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 28 m
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
28 m of the Cirque d’Hiver Bouglione, 7 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Columns around the oval
A ring of columns around a curved drum is the finest detail on a circus of this kind. Print friendly adapts it for a small print; a larger print or 0.12 mm layers keeps the capitals readable.
- Shallow self-supporting roof
A low, self-supporting roof with no central pole leaves a broad smooth slope. Printing at 0.16 mm layers keeps the slope clean and the eaves edge crisp.
- One piece with the ground
The Cirque d’Hiver Bouglione is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Cirque d’Hiver Bouglione takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Cirque d’Hiver Bouglione
The Cirque d'Hiver stands at 110 rue Amelot in the 11th arrondissement of Paris, where rue des Filles du Calvaire meets rue Amelot. Emperor Napoleon III opened it on December 11, 1852, as the Cirque Napoléon. The architect was Jacques Ignace Hittorff. Over the years the building has hosted circuses, dressage exhibitions, orchestral concerts, Turkish wrestling and fashion shows.
The circus is an oval polygon with 20 sides and Corinthian columns at the angles, so the building reads as an oval around an oval ring. Spectators sit on steeply banked seats, much as in a miniature indoor Colosseum. Its low, angled roof supports itself like a shallow dome, leaving no central pole to block the view. James Pradier provided the exterior with bas-reliefs of Amazons, while the panels of mounted warriors were carved by Francisque Duret and Astyanax-Scévola Bosio.
Jules Etienne Pasdeloup's orchestral concerts started at the Cirque Napoléon on October 27, 1861, and ran for over twenty years. Louis Dejean, proprietor of the summer circus on the Champs-Élysées, was the guiding entrepreneur. He wagered that evening performances under limelight, with audiences kept away from tanbark dust and smells, would become a dressed-up occasion for Paris society. The circus is listed as a monument historique.
About this model
The Cirque d’Hiver Bouglione is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
