3D print the Coignet Stone Company Building
A free, printable model of the Coignet Stone Company Building, a small two-story building with an ornate facade and entrance stairs, beside a street corner, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Ornate trim on a small building
This is a small building with detailed window frames, cornice trim and a front stair with curved sides. A larger print size is worth it; Full detail keeps every modeled feature.
- Tiny chimney and stair rails
The small chimney on the roof and the curved stair sides are the thinnest parts. Print friendly adapts them to the print scale, and a layer height of 0.12 mm keeps the edges clean.
- One piece with the ground
The Coignet Stone Company Building is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Coignet Stone Company Building takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Coignet Stone Company Building
Brooklyn's Gowanus neighborhood has this small landmark where Third Street meets Third Avenue: the Coignet Stone Company Building, known as well as the Pippen Building. William Field and Son were the architects, and construction ran from 1872 to 1873. No older concrete building still stands in the city. It is also the sole survivor of the Coignet Agglomerate Company's concrete factory complex, which covered five acres beside the Gowanus Canal.
Its cast-stone facade rises two stories over a raised basement. The footprint is 7.6 by 12.2 m (25 by 40 feet), with the long side facing Third Street. The walls use a concrete called Beton Coignet, a stone-like precast product that Frenchman François Coignet developed in the 1850s and that the company made at its adjacent factory. The building was meant as the company's office and as a showroom for its artificial stone products, and a parapet made it seem almost three stories tall.
The Coignet Agglomerate Company closed entirely in 1882. After that, the Brooklyn Improvement Company occupied the building for three-quarters of a century, until it too closed in 1957. A facade renovation in the 1960s did not reach the building behind it, which was left to decay for the remainder of the twentieth century. The city made it a designated landmark on June 27, 2006, and exterior restoration followed from 2014 to 2016.
About this model
The Coignet Stone Company Building is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
