A white 3D print of Congregation Beth Jacob Ohev Sholom, a low brick synagogue with a flat roof and a small raised corner block, beside a road with taller buildings behind it.

3D print Congregation Beth Jacob Ohev Sholom

A free, printable model of Congregation Beth Jacob Ohev Sholom, a low brick synagogue with a raised corner block, beside a road and taller buildings, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Congregation Beth Jacob Ohev Sholom model, North view North
  • Congregation Beth Jacob Ohev Sholom model, East view East
  • Congregation Beth Jacob Ohev Sholom model, South view South
  • Congregation Beth Jacob Ohev Sholom model, West view West
On a 160 mm print
3 mm
Scale
1:3,750

3 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Simple block, fine entrance

    The building is a low brick block with a raised corner section. Its finest detail is in the entrance and window frames; Full detail keeps them on a larger print.

  2. Window and wall bands

    Horizontal bands and window frames mark the walls. A layer height of 0.12–0.16 mm keeps them crisp.

  3. One piece with the ground

    Congregation Beth Jacob Ohev Sholom is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Congregation Beth Jacob Ohev Sholom takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Congregation Beth Jacob Ohev Sholom

Congregation Beth Jacob Ohev Sholom is an Orthodox Jewish synagogue on Rodney Street, number 284, in the Williamsburg section of Brooklyn. Its worship follows the Ashkenazi rite. German Jews founded it in 1869, breaking away from a Reform congregation in order to be Orthodox. On Long Island, which includes Brooklyn and Queens, it is the oldest Orthodox congregation, and it is one of the last non-Hasidic Jewish institutions left in Williamsburg.

The congregation put up its first building in 1870, on Keap Street. After a 1904 merger with Chevra Ansche Sholom it became Congregation Beth Jacob Anshe Sholom. In 1905 it built again, on South Third Street (numbers 274–276), to a design by George F. Pelham; the building was consecrated in 1906. In the 1950s it was expropriated and torn down for the Brooklyn-Queens Expressway.

Another congregation faced a similar loss, and the two combined. Just south of Broadway, at 284 Rodney Street, the merged group built a new home in 1957 under the name Congregation Beth Jacob Ohev Sholom. The early sanctuary on Keap Street seated 164 men on its main level and 135 women in the gallery. Rabbi Joshua Fishman led the congregation from 1971 and retired in 2014.

About this model

Congregation Beth Jacob Ohev Sholom is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Same skyline

More landmarks in New York