A white 3D print of Cuyler Presbyterian Church, a long gabled building with a decorated end wall, hemmed in by taller buildings and streets.

3D print the Cuyler Presbyterian Church

A free, printable model of Cuyler Presbyterian Church, a long gabled building with a decorated front, shown among the taller buildings and streets around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Cuyler Presbyterian Church model, North view North
  • Cuyler Presbyterian Church model, East view East
  • Cuyler Presbyterian Church model, South view South
  • Cuyler Presbyterian Church model, West view West
On a 160 mm print
4 mm
Scale
1:3,750

4 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Decorated gable end

    One end of the long roof carries the ornate front. Choose Full detail at a larger size, or keep Print friendly with a 0.12–0.16 mm layer height so that front stays crisp.

  2. One piece with the ground

    The Cuyler Presbyterian Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Cuyler Presbyterian Church takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Cuyler Presbyterian Church

Cuyler Presbyterian Church (also called Cuyler Chapel) stands on Pacific Street in Brooklyn, at numbers 358–360. Architect Edward Sargent designed it, and it was built in 1892 as a two-story rectangular building with a steeply pitched slate roof and molded terra cotta copings. In the early 1980s it became a private residence. The former parsonage dates from around 1851 and is a Greek Revival dwelling.

The church was a cornerstone of the Mohawk community in Boerum Hill, a neighborhood once called North Gowanus. After their Canadian homeland, the Mohawk named the neighborhood "Little Caughnawaga." Over nearly 50 years, most Mohawk living in New York settled within 10 square blocks of Brooklyn, and the families came from Kahnawake, a reserve in Quebec.

Many men were ironworkers, called Mohawk skywalkers, who worked on bridge and skyscraper projects in New York. The women held a variety of jobs and also built community for their families. Its National Register of Historic Places listing dates from 2001.

About this model

The Cuyler Presbyterian Church is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Same skyline

More landmarks in New York