3D print Dolmabahçe Palace
A free, printable model of Dolmabahçe Palace, with its long waterfront wings, gardens and the streets and buildings nearby, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 13 mm
- Scale
- 1:4,375
13 mm tall on a 160 mm print
Make this print opens the generator on a 700 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rows of arched windows
Small arched windows and cornice lines run along the long wings. A bigger print size keeps more of them, and layers of 0.12 to 0.16 mm keep the facade lines crisp.
- Long, low roof lines
The palace is long and low, with several hipped roofs. Print friendly adapts the small roof and facade details to the print scale; Full detail keeps them, which suits a larger print or a fine nozzle.
- One piece with the ground
Dolmabahçe Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Dolmabahçe Palace takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Dolmabahçe Palace
Dolmabahçe Palace is an imperial palace of the 19th century in Istanbul, Turkey, standing on the European shore of the Bosporus. Abdülmecid I, the 31st sultan of the Ottoman Empire, ordered it, and it went up between 1843 and 1853. Earlier, the sultan's household had been at Topkapı Palace. The new palace was placed close to where the Beşiktaş Sahil Palace had stood before it was demolished. Hacı Said Ağa managed the building work. The architects were Garabet Balyan, Evanis Kalfa and Garabet's son Nigoğayos Balyan, members of the Balyan family, who were Armenian architects at the Ottoman court.
The palace was the Ottoman Empire's main administrative center from 1853 to 1887 and again from 1909 to 1922. Six sultans lived there, from 1853 until the Caliphate was abolished in 1924. A law effective March 3, 1924 passed ownership to the new Turkish Republic's national heritage. Mustafa Kemal Atatürk, who founded the Republic of Turkey and was its first President, used it as a presidential residence in the summers, and he died there on November 10, 1938.
Turkey's largest palace, Dolmabahçe covers an area of 45,000 square meters (480,000 sq ft) and has 68 toilets in addition to 285 rooms, 46 halls and six hammams. Its design mixes Baroque, Rococo and Neoclassical elements with traditional Ottoman architecture. Seen from the Bosporus, the exterior shows a classical European arrangement of two wings divided by a big avant-corps. The large Ceremonial Hall has a dome 36 m (118 ft) high.
About this model
Dolmabahçe Palace is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
