3D print the Dutch Reformed Church at Romopock
A free, printable model of Ramapo Reformed Church, a church with a spired belfry and an arcaded side wing, and the lawn and road around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Spired belfry
The belfry and spire form the tallest, thinnest part of the church. Print slowly with good cooling, and use a 0.12–0.16 mm layer height to keep the spire crisp.
- Arcaded side wing
A low wing beside the church has a row of arches. Print friendly adapts them to the print scale; Full detail on a larger print keeps more of the arches.
- One piece with the ground
The Dutch Reformed Church at Romopock is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Dutch Reformed Church at Romopock takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Dutch Reformed Church at Romopock
Ramapo Reformed Church was formerly known as the Dutch Reformed Church at Romopock. The historic church sits where Island Road meets West Ramapo Avenue, in Mahwah, which lies in Bergen County, New Jersey.
The church has carried two names over time. The building dates to 1798, which makes it a church from the late eighteenth century. The National Register of Historic Places added it on September 5, 1985.
About this model
The Dutch Reformed Church at Romopock is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
