3D print the Montville Schoolhouse
A free, printable 3D model of the Montville Schoolhouse, with its roof cupola, and the grassy ground and road beside it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Montville Schoolhouse
At 6 Taylortown Road in Montville Township, Morris County, New Jersey, stands a historic one-room schoolhouse of red brick. It dates from 1871 and replaced two earlier schoolhouses on the same site. On December 11, 2009 it joined the National Register of Historic Places, recognized for its importance in education and in politics and government.
Over the years the building has served several purposes. The Methodist Episcopal Church also used it. From 1911 to 1939, the township ran its first town hall there, and from 1943 to 1961 it held the post office. Since 1963 it has housed Montville Township's Historical Society and Museum.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 3 mm | 1:3,750 |
| 200 mm | 4 mm | 1:3,000 |
| 256 mm | 4 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Cupola and chimney
- The small louvered cupola and the thin chimney are the most delicate parts of this tiny building. A larger print size and Full detail keep them; Print friendly strengthens them at small scale.
- Brick-lined walls and windows
- Fine horizontal lines mark the brick walls, and the arched windows are framed in relief. A layer height of 0.12 mm keeps these crisp.
- One piece with the ground
- The Montville Schoolhouse is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Montville Schoolhouse takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Montville Schoolhouse is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Montville Schoolhouse STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Montville Schoolhouse grows with the print: about 3 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
