3D print the Dyckman House
A free, printable model of the Dyckman House, a gambrel-roofed farmhouse with porches, on its small green lot among the apartment buildings of Inwood, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
3 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Gambrel roof and chimneys
The broad gambrel roof is lined with thin shingle courses and topped with slim chimneys. "Print friendly" adapts the chimneys to the print scale, and a larger print keeps them sturdier.
- Porch railings and posts
Porches with fine posts and balusters wrap the front. "Full detail" keeps them, ideally at a layer height of 0.12–0.16 mm; at a small print size they may be simplified.
- One piece with the ground
The Dyckman House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Dyckman House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Dyckman House
The Dyckman House, also the Dyckman Farmhouse Museum, is in Inwood, Manhattan, at Broadway and 204th Street (4881 Broadway). The Dutch Colonial farmhouse was William Dyckman's third home, dating from c. 1783–1785, and first stood within more than 250 acres (100 ha) of family farmland. No other farmhouse on Manhattan island is older.
The family had built two earlier houses, and the American Revolutionary War destroyed the second. For the new one the Dyckmans used locks, latches, hinges, nails, bolts and bricks salvaged from nearby huts of Hessian soldiers. It remained with the family through several generations, up to 1868. By the 1910s it had fallen into disrepair and faced demolition, and in 1916 the family handed it to the city government. It has been a museum ever since.
The house sits on a rise roughly 15 feet (4.6 m) higher than the neighboring stretch of Broadway, surrounded by a fieldstone retaining wall. Its two-story facade combines fieldstone, brick and white clapboard under a gambrel roof, an early example of that roof type in New York City, and it holds 14 rooms. It is both a New York City landmark and a National Historic Landmark.
About this model
The Dyckman House is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
